GeekVape Cerberus Subohm Tank Preview

 

Design

The Cerberus comes with one typical 810 Delrin drip tip that is about 18.6mm wide. You can use other 810 drip tips that are about the same size in here just fine.

The one drawback with this though is that it’s a little too tight. You need to push down hard before twisting to get it on or off.

Capacity

The Cerberus comes with bubble glass preinstalled, which holds a max of 5.5ml. The package also has a regular straight glass tank that holds 4ml. 

If you’re running this tank at high-wattage, which is really what it’s designed to do, you’ll probably want the extra capacity of the bubble glass.

Coil

The coil that Geekvape designed this tank for is called the Super Mesh X1 Coil, which is 0.2ohm coil head rated to work best between 60-80W but can go up to 90 watts. I've been using it at 90 watts just fine.

You can also buy the 0.4ohm IM1 for 40-60 watt vaping or the 0.15ohm IM4 coil for using between 60-80 watts.

Interestingly, the Cerberus is also compatible with Smok TFV8 Baby Coils (the Cerberus coils also work in the Smok TFV8). The TFV8 coils won’t perform anywhere near as well, but it’s good to have this option if you’ve got them laying around.

Airflow

This is a bottom airflow tank, which means it’s designed for better flavor, although that does make it more likely to leak. The airflow control ring moves smoothly and stops in both directions. You can close it down pretty tight to get a restricted lung draw, or you can open it wide open to get massive hits on the 90-watt coils.

The airflow is a bit turbulent, which makes the tank a little noisy, but nothing too annoying.

Performance(Flavor)

The flavor is crazy. In fact, this might be the best flavor I’ve gotten from a mesh tank yet. I can’t believe how good the flavor is.

Conclusion

In my opinion, it’s totally worth it. There are really only a couple of cons that I have and it’s that the airflow is a little loud and that the top cap is hard to take off. But that’s it. The airflow doesn’t bother me and I’m guessing that over time the top cap will loosen up, so those aren’t big deals for me at all. But the pros make up for everything. It’s easy to fill and set up, the X1 coils perform perfectly at the max 90 watts, and the flavor is so good that I can’t see how it can get any better.

Special offer

No Required Coupon

What's new on Joyetech Obliq Kit?

 Hey guys! Let's do a brief preview of the latest kit——Joyetech Obliq Kit！

Joyetech Obliq Kit Details

• Size: 85x42x22.6mm
• Output: 60W (max)
• Battery: 1800mAh (internal)
• Display: Colour screen – size not stated
• E-liquid capacity: 3.5ml (standard) / 2ml (TPD)
• Type C USB charging – 60 min charge time
• Coils: EZ coil range including RBA
• Leak proof pod
• Side adjustable airflow
• Top fill
• Avatar AI chip

Price: Get the lowest price with Code OBLI

Mod Body

The styling features a patterned glass panel on the side of the mod, which is reflected in the leaning shape of the design. The kit comes with an internal 1800mAh battery which is charged via the USB Type C port at up to a 2A charge rate. Joyetech say this can be fully charged in up to 60 minutes.

About modes, it has 2 user modes – Smart Mode = the device remembers your usual setting for the coil installed or you can simply adjust the output using the adjustment buttons. Output wise this will output up to 60W and your vaping data is displayed on the color screen – the size is sadly not stated. Controlling the mod is the Avatar.AI chipset which defaults to the Smart mode when a new coil is installed to help prevent damaging the coil.

Pod 

It has a top fill port and the side of the pod features an adjustable airflow valve.

The pod is apparently leakproof with the pod base being totally sealed when the coil is installed.

Coils

0.4ohm (included in kit)

0.8ohm (included in kit)

EZ RBA (available separately)

These coils are also used in the Tralus, Exceed Grip Plus and Exceed Grip Pro.

Eleaf Rotor Tank Overview

 The Rotor is a well designed and beautiful tank. 

It’s got a 26mm base diameter so it’s an average-sized sub-ohm tank that doesn’t overhang on most dual battery mods.

The filling system on this tank is great that there’s a button on the top cap that you have to press in order to unlock and slide the top cap. This makes it very unlikely that the top cap will open and spill e-juice from the fill port. Which also can be called a “child lock” so you have to push a button on the side in order to slide it back. I like it since I’ve seen some complaint about slide tanks opening up in their pocket so ti protects against that even though I’ve personally never had that issue. 

The Rotor Tank will hold up to 5.5ml of e-juice in its bubble glass tank. If you break it, Eleaf has thoughtfully included a spare bubble glass in the package. 

The airflow is on the bottom of the tank. with the airflow, ring closed you actually get zero airflow! However, thankfully for those of us who like a restricted DTL vape you still get plenty of adjustment left for that!

There are 2 included coil options no RBA head. It comes with 0.2ohm(40-90W) HW-T Coil(pre-installed) and extra a 0.15ohm(50-100W) HW-M Coil. Overall it’s an average coil flavorwise.

It features a wide 810 drip tip but you won’t be able to switch it out. There are 4 colours to choose from: Blue, Dazzling, Silver and Black.

Check the price here with using Code RTO

PROS

5.5ml Capacity

Great Flavor From Rotor Coil

Button Locked Fill Port

Nice looking tank

CONS

HW-M Coil is Average

Can’t Swap Drip Tips

OBS Cabo Pod Kit Overview

The main feature and selling point of this kit is the fact that it has “Fingerprint recognition”. The recent VapeFly TGO pod mod had this feature too.

OBS Cabo Specs

Pod Size 24. 5mm X 23.8mm X 34.5mm

E-juice Capacity 3.5ML (Restricted DTL) + 3ml (DTL)

Pod Material Zinc Aloy +PCTG

Filling Side Filling

Mod Size 31mm X 24mm X 90.5mm

Battery External 18650 battery(not included)

Mod Material Zinc Alloy / PC+ABS Fire proof

Display Cut-of Time 90s

Wattage Range 5W-80W

Standby Current <60uA

Output Voltage 1V-8V

Resistance Range 0.10-3.0ohm

Charging Voltage 5V

Charging Current 1.6A

Color Black, Gunmetal, Chrome

Price $34.78 Use Code OCPK  to order OBS Cabo kit

There is a USB Type C charging port for emergency charging and apparently will charge a battery in 1.5hours. Using a Variable Wattage adjustment system the output is between 5-80W.

As to how useful the fingerprint system is – is up to the user, but it is mainly to prevent unauthorized use of your vape – important when there are children around.

Looking at the main device now – this uses a single 18650 battery which is not included.

All of your vaping data is displayed on the LED display – however the screen size is not stated.

Moving on to the pod – this is refillable and has replaceable coils.

There are 2 pods included in the kit which have different airflow options:

• 3.5ml Restricted Direct to lung
• 3ml Direct to lung

We tell you what these terms mean in our Guide to MTL and DTL Vaping styles.

I imagine the pod capacity will be reduced for retail in TPD regulated areas.

As mentioned above the coils are replaceable and this uses the new OM range of coils. There are 2 coils included in the kit:

OM CA Mesh 0.4ohm

OM BO Mesh 0.2ohm

This looks like a handy little kit with plenty of decent features.

Do you wanna to win a free Drag 2 Kit?

Drag 2 Kit Giveaway is running, and we set 1 winner of this giveaway. The winners will be drawn on July 16th.

Join the giveaway here<<<https://bit.ly/38vjvJx

Main features of Drag 2 Kit

1. Innovative GENE.FIT Chip

2. Transformable PnP Pod Tank

3. Powered by dual 18650 batteries

4. Max 177W output

5. Balance charge with different brand battery

6. Compatible with all PnP Coils

7. Magnetic absorption and adjustable air 510 base

8. Equipped with PnP Coils of 0.15ohm and 0.2ohm

9. Powerful magnet keep it simple

10. Safety protections

Good luck to all of you!

VOOPOO Drag X Mod Pod Kit Giveaway event is on!

Drag X Mod Pod Kit Giveaway is here!

It will end on May 27th. And there will be a 1 winner,

What's  Drag X?

Recently, a very popular kit is launched from VOOPOO-the Drag X  Mod Pod Kit!

Parameters

• Size:  95*32.5*28
• Pod Capacity: 4.5ml
• Pod Material: PCTG
• Pod Resistance: PnP-VM6 0.15ohm, PnP-VM1 0.3ohm
• Mod Material: Alloy + Leather
• Outpur Power: 5-80W
• Output Voltage: 3.2-4.2V
• Mod Resistance: 0.1-3.0ohm
• Battery Capacity: Single 18650 (not included)
• Colors: Classics, Carbon Fiber, Retro, Mashup, Chestnut, Marsala, Galaxy Blue

The kit has leather texture interface and plenty of intelligent functions. Like PUSS and SCORE ranking mode, Anti scratch, anti perspiration and anti fingerprint. It is monitored by a new generation GENE.TT Chip. Drag X can deliver 80W powerful output. Drag X is designed with the innovative infinite airflow system that supports the regulation of any size of airway.

Good luck to you!

You are very similar to Aegis Legend Mod, right?

I believed that you are very similar to Aegis Legend series. 

So as Aegis Legend Box Mod.

A durable and powerful Box Mod, comes from Aegis Mod family. Owning waterproof, shockproof and dust-proof features, it gives many conveniences to vapers!

Controlled by AS chipset, the Aegis Legend Mod releases up to 200W max output. A colorful screen is easy to navigate, offering fast, stable and powerful performance.

Moreover, the Aegis Legend uses six different and high-grade materials to achieve style and extreme durability. More than 15 colors are available, there is always one suit you.

Now it's the perfect time to get it with 46% discounts at Sourcemore.com. Thank you for reading and enjoy shopping at SOURCEMORE

This weekly sale of GeekVape Bident Pod Kit

Bident Kit is powered by built-in 950mAh battery for a long time vaping. 

Only a single fire button and LED battery life indicator, it is easy for operation. The Bident Cartridge holds 3.5ml large e-juice capacity and adopts 0.8ohm/1.2ohm coils inside for both DL and MTL vaping. 

Plus the easy bottom filling and bottom adjustable airflow system, it will bring you a fantastic vaping experience. 

OBS Cube FP is a fingerprint recognition Mod

Cube FP Mod is a multifunctional, fashionable and comfortable TC Box Mod.

The design is based on the Cube X Mod. The outstanding feature is the fingerprint recognition system, giving you convenient and efficient operation, safe and reliable vaping experience. A device that truly belongs to you!

This Cube FP Mod has a type-c port and it can be fully charged in 1.5 hours. In addition, it is equipped with an LED screen to show you clear vaping information. Besides, utilizing 510 connector, it is compatible with Cube Tank and CBD Tank. Moreover, there are multiple protections to ensure your safety.

Here is a Special Offer for it, ordering OBS Cube FP Box Mod with the Coupon Code "FPM" at sourcemore.vape store.

Hugsvape MagicianTank is clearance

Magician Mesh Tank is constructed of stainless steel. 

810 Drip Tip
510 Thread

It features 3ml and can be increased to 5ml with extra bubble glass. There are two coils: dual mesh coil and triple mesh coil, both are made of Kanthal. The filling way is top-fill, very simply operate.

Clearance: Get the best price for ordering the Magician Tank Atomizer.

SMOK ALIKE Cartridge Deal

ALIKE Pod Cartridge is used for SMOK ALIKE Pod Kit. 

Adopting PCTG food-grade material, it stands for safety and reliability.Coming with removable and replaceable 510 drip tip and 5.5ml e-juice capacity, it utilizes side filling design with a silicone plug to bring you great convenience.

In addition, the ALIKE Cartridge works with RPM series coil, including RPM Mesh 0.4 ohm coil, RPM DC 0.8ohm MTL coil, RPM Quartz 1.2ohm coil, RPM SC 1.0ohm coil, RPM MTL Mesh 0.3ohm coil, RPM RBA coil and RPM Triple Coil 0.6ohm, which will meet your individual demands better.

Only 3pcs of each pack.

iStick Amnis 2 Kit Deal

 The main points of iStick Amnis 2 Kit  

 The Tank
 GTiO Tank
 1.8ml/3ml e-juice capacity.
 Supporting unique 0.6ohm GT M coil and 1.2ohm GT Coil for nicotine salt juices

The battery
1100mAh built-in battery
23W max output
A lanyard,
Type-C USB port

Such a kit, is simpe and compact. At the same time, it can give users good hand-feel. It is very easy use with only one button.  And I believed that you kown it very well.

Special Offer: $22 Eleaf iStick Amnis 2 Kit with GTiO Tank by applying the Coupon Code: GTO

Uwell Crown 4 Deal

Uwell hot sale vape kit- Uwell Crown 4 Vape Kit.

Except its exquisite as well fashionable looking, it brings users so many extremely stunning experience!

Working by dual 18650 batteries with a strong output of 200W. The UWELL circuit board is used for stable and safe vaping. And the hand-feel is so good.

About UWELL Crown 4 Tank,6ml e-juice capacity, patented self-cleaning technology, which makes it more outstanding. Moreover, the U1 and U2 coil are born for excellent flavors. What's more, the  Crown 4 tank can also with a dual SS904L coil. It comes with top-filling and adjustable bottom airflow system.

In short, Crown 4 Kit is a wonderful vaping device that can satisfy great vaping experience and visual enjoyment. There are six colors for your choice, you can have a good vaping experience with Crown 4 Kit

Special Offer: Get the best price to ordering Crown 4 by applying the Coupon Code "CNY5"

Know more details, please visit www.sourcemore.com

Kanger Auro Kit Overview

Kanger Auro Kit is another pen style suite. 

You can know its features through the pictures below.

Besides, Kanger Auro comes with vrious safety protections: Short circuit protection, High temperature protection, Overtime protection, Low voltage protection, Overcharging protection

Vivismoke Coil Stick One Deal

This is a tool for making coils.

It is created to make different coils with different diameters.

Coil Stick One comes with unibody design and can rotate positively and negatively. With telescopic structure, there is no need to be disassembled and assembled. What's more, it is easier and better than old kuro coil jigs and also more simple than 4 in1 /6 in1 coils jig sets.

Special Offer: $3.9 Vivismoke Coil Stick One

SMOK Fetch Mini Kit Deal

Fundamental information of Fetch Mini Pod 

Dimensions               76mm x 42.8mm x 18.4mm
E-Liquid Capacity      3.7ml
Battery Capacity 1200mAh
Output Voltage 0.5V - 4.1V
Output Wattage 5W - 40W
Charging                 1.2A Max
Resistance Range      0.3ohm - 2.5ohm
Firing Time            0.001s
Screen              0.96" TFT Screen
Charging Port            Micro USB Charging

Fetch Mini is an old product in the vape market. 

The Eco-friendly material - PCTG, approved by the FDA and EU for any type of application with food contact. With the 2.5D arc edge glass on both panels and applying laser UV transfer texturing under glass panels, it can further be adding to the 3D effects.

At the same time. it comes to the waterproof and dustproof functions, safer in rainy environments and prevents dust ingress. The 0.96" TFT Screen display, showing you specific vape data in a clear way.


Special Offer: $19.37 SMOK Fetch Mini Pod Kit with Code: FTMN